now browsing by author
An electric guitar is a guitar that uses a pickup to convert the vibration of its strings into electrical impulses. The most common guitar pickup uses the principle of direct electromagnetic induction. The signal generated by an electric guitar is too weak to drive a loudspeaker, so it is amplified before sending it to a loudspeaker. Since the output of an electric guitar is an electric signal, the signal may easily be altered using electronic circuits to add “color” to the sound. Often the signal is modified using effects such as reverb and distortion.
Invented in 1931, the electric guitar became a necessity as jazz guitarists sought to amplify their sound in the big band format. Early proponents of the electric guitar on record included: Les Paul, Lonnie Johnson, Sister Rosetta Tharpe, T-Bone Walker, and Charlie Christian. During the 1950s and 1960s, the electric guitar became the most important instrument in pop music. It has evolved into a stringed musical instrument that is capable of a multitude of sounds and styles. It served as a major component in the development of rock and roll and many other genres of music.
Electric guitar design and construction varies greatly as to the shape of the body, and configuration of the neck, bridge, and pickups. Guitars have a fixed bridge or a spring-loaded hinged bridge that lets players bend notes or chords up or down in pitch, or perform a vibrato. The sound of a guitar can be modified by new playing techniques such as string bending, tapping, hammering on, using audio feedback, or slide guitar playing. There are several types of electric guitar, including the solid body guitar, various types of hollow body guitars, the seven-string guitar, which typically adds a low “B” string below the low “E”, and the twelve string electric guitar, which has six pairs of strings.
Popular music and rock groups often use the electric guitar in two roles: as a rhythm guitar which provides the chord sequence or “progression” and sets out the “beat” (as part of a rhythm section), and a lead guitar, which is used to perform melody lines, melodic instrumental fill passages, and guitar solos.
Various experiments at electrically amplifying the vibrations of a string instrument date back to the early part of the twentieth century. Patents from the 1910s show telephone transmitters adapted and placed inside violins and banjos to amplify the sound. Hobbyists in the 1920s used carbon button microphones attached to the bridge, however these detected vibration from the bridge on top of the instrument, resulting in a weak signal. With numerous people experimenting with electrical instruments in the 1920s and early 1930s, there are many claimants to have been the first to invent an electric guitar.
Electric guitars were originally designed by guitar makers and instrument manufacturers. Some of the earliest electric guitars adapted hollow bodied acoustic instruments and used tungsten pickups. The first electrically amplified guitar was designed in 1931 by George Beauchamp, General Manager at National Guitar Corporation with Paul Barth who was Vice President. The maple body prototype for the one piece cast aluminum “Frying Pan” was built by Harry Watson, factory superintendent of National Guitar Corporation. Commercial production began in late summer of 1932 by the Ro-Pat-In Corporation (Electro–Patent-Instrument Company Los Angeles), a partnership of Beauchamp, Adolph Rickenbacker (originally Rickenbacher), and Paul Barth. By 1934 the company was renamed Rickenbacker Electro Stringed Instrument Company.
The need for the amplified guitar became apparent during the big band era as orchestras increased in size, particularly when guitars had to compete with large brass sections. The first electric guitars used in jazz were hollow archtop acoustic guitar bodies with electromagnetic transducers. By 1932 an electrically amplified guitar was commercially available. Early electric guitar manufacturers include: Rickenbacker (first called Ro-Pat-In) in 1932, Dobro in 1933, National, AudioVox and Volu-tone in 1934, Vega, Epiphone (Electrophone and Electar), and Gibson in 1935 and many others by 1936.
The solid body electric guitar is made of solid wood, without functionally resonating air spaces. Rickenbacker offered a cast aluminum electric steel guitar, nicknamed “The Frying Pan” or “The Pancake Guitar”, developed in 1931 with production beginning in the summer of 1932.
The first solid body “Spanish” standard guitar was offered by Vivi-Tone no later than 1934. An example of this model, featuring a guitar-shaped body of a single sheet of plywood affixed to a wood frame. Another early, substantially solid Spanish electric guitar, called Electro Spanish, was marketed by the “Rickenbacker” guitar company in 1935 and made of Bakelite. By 1936, the Slingerland company introduced a wooden solid body electric model, the Slingerland Songster 401 (and a lap steel counterpart: the Songster 400).
The earliest documented performance with an electrically amplified guitar was in 1932, by Gage Brewer. The Wichita, Kansas-based musician had an Electric Hawaiian A-25 (frypan, lap-steel) and a standard Electric Spanish from George Beauchamp of Los Angeles, California. Brewer publicized his new instruments in an article in the Wichita Beacon of 2 October 1932 and through performances that month.
The first recordings using the electric guitar were by Hawaiian style players, in 1933. Bob Dunn of Milton Brown’s Musical Brownies introduced the electric Hawaiian guitar to Western Swing with his January 1935 Decca recordings, departing almost entirely from Hawaiian musical influence and heading towards jazz and blues. Alvino Rey was an artist who took this instrument to a wide audience in a large orchestral setting and later developed the pedal steel guitar for Gibson. An early proponent of the electric Spanish guitar was jazz guitarist George Barnes who used the instrument in two songs recorded in Chicago on 1 March 1938, “Sweetheart Land” and “It’s a Low-Down Dirty Shame”. Some incorrectly attribute the first recording to Eddie Durham, but his recording with the Kansas City Five was 15 days later. Durham introduced the instrument to a young Charlie Christian, who made the instrument famous in his brief life and would be a major influence on jazz guitarists for decades thereafter.
Gibson’s first production electric guitar, marketed in 1936, was the ES-150 model (“ES” for “Electric Spanish”; and “150” reflecting the $150 price of the instrument, along with matching amplifier). The ES-150 guitar featured a single-coil, hexagonally shaped “bar” pickup, which was designed by Walt Fuller. It became known as the “Charlie Christian” pickup (named for the great jazz guitarist who was among the first to perform with the ES-150 guitar). The ES-150 achieved some popularity, but suffered from unequal loudness across the six strings.
Early proponents of the electric guitar on record include: Alvino Rey (Phil Spitalney Orchestra), Les Paul (Fred Waring Orchestra), Danny Stewart (Andy Iona Orchestra), George Barnes (under many aliases), Lonnie Johnson, Floyd Smith, Big Bill Broonzy, T-Bone Walker, George Van Eps, Charlie Christian (Benny Goodman Orchestra) Tampa Red, Memphis Minnie, and Arthur Crudup.
A functionally solid body electric guitar was designed and built in 1940 by Les Paul from an Epiphone acoustic archtop. His “log guitar” (so called because it consisted of a simple 4×4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Epiphone hollow body halves attached to the sides for appearance only) shares nothing in design or hardware with the solid body Gibson Les Paul introduced in 1952. However, the feedback problem associated with hollow-bodied electric guitars was understood long before Paul’s “log” was created in 1940; Gage Brewer’s Ro-Pat-In of 1932 had a top so heavily reinforced that it essentially functioned as a solid-body instrument.
In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him.
Electric guitar design and construction varies greatly as to the shape of the body, and configuration of the neck, bridge, and pickups. However, some features are present on most guitars. The photo below shows the different parts of an electric guitar. The headstock (1) contains the metal machine heads (1.1), which use worm gear for tuning. The nut (1.4)—a thin fret-like strip of metal, plastic, graphite or bone—supports the strings at the headstock end of the instrument. The frets (2.3) are thin metal strips that stop the string at the correct pitch when the player pushes a string against the fingerboard. The truss rod (1.2) is a metal rod (usually adjustable) that counters the tension of the strings to keep the neck straight. Position markers (2.2) provide the player with a reference to the playing position on the fingerboard.
The neck and fretboard (2.1) extend from the body. At the neck joint (2.4), the neck is either glued or bolted to the body. The body (3) is typically made of wood with a hard, polymerized finish. Strings vibrating in the magnetic field of the pickups (3.1, 3.2) produce an electrical current in the pickup winding that passes through the tone and volume controls (3.8) to the output jack. Some guitars have piezo pickups, in addition to or instead of, magnetic pickups.
Some guitars have a fixed bridge (3.4). Others have a spring-loaded hinged bridge called a vibrato bar, tremolo bar, or whammy bar that lets players bend notes or chords up or down in pitch, or perform a vibrato embellishment. A plastic pickguard on some guitars protects the body from scratches or covers the control cavity that holds most of the wiring.
The degree to which the choice of woods and other materials in the solid guitar body (3) affects the sonic character of the amplified is disputed. Many believe it is highly significant, while others think the difference between woods is subtle. In acoustic and archtop guitars, wood choices more clearly affect tone.
Typical solid body electric guitars woods include alder (brighter, but well rounded), swamp ash (similar to alder, but with more pronounced highs and lows), mahogany (dark, bassy, warm), poplar (similar to alder), and basswood (very neutral).
Maple, a very bright tonewood, is also a popular body wood, but is very heavy. For this reason it is often placed as a ‘cap’ on a guitar made primarily of another wood. Cheaper guitars are often made of cheaper woods, such as plywood, pine or agathis—not true hardwoods—which can affect durability and tone. Though most guitars are made from wood, any material may be used. Materials such as plastic, metal, and even cardboard have been used in some instruments.
The guitar output jack typically provides a monaural signal. Many guitars with active electronics use a jack with an extra contact normally used for stereo. These guitars used the extra contact to break the ground connection to the on-board battery to preserve battery life when the guitar is unplugged. These guitars require a mono plug to close the internal switch and connect the battery to ground. Standard guitar cables use a high impedance 1/4 inch (6.35 mm) mono plug. These have a tip and sleeve configuration referred to as a TS phone connector.
A few guitars feature stereo output. For example Rickenbacker guitars equipped with Rick-O-Sound. There are a variety of ways the “stereo” effect may be implemented. Commonly, but not exclusively, stereo guitars route the neck and bridge pickups to separate output buses on the guitar. A stereo cable then routes each pickup to its own signal chain or amplifier. For these applications, the most popular connector is a high impedance 1/4 inch plug with a tip, ring and sleeve configuration—also known as a TRS phone connector. Some studio instruments, notably certain Gibson Les Paul models, incorporate a low impedance 3-pin XLR connector for balanced audio. Many exotic arrangements and connectors exist that support features such as midi and hexaphonic pickups.
Bridge and tailpiece systems
The bridge and tailpiece, while serving separate purposes, work closely together to affect playing style and tone. There are four basic types of bridge/tailpiece systems on electric guitars. Within these four types are many variants.
A hard-tail guitar bridge anchors the strings at or directly behind the bridge, and is fastened securely to the top of the instrument. These are common on carved top guitars such as the Gibson Les Paul, Paul Reed Smith models, and on slab body guitars like the Music Man Albert Lee and Fender guitars that are not vibrato arm equipped.
A floating or trapeze tailpiece (similar to a violin’s) fastens to the body at the base of the guitar. These appear on Rickenbackers, Gretschs, Epiphones, a wide variety of archtop guitars, particularly Jazz guitars, and the 1952 Gibson Les Paul.
Pictured is a tremolo arm or vibrato tailpiece style bridge/tailpiece system, often called a whammy bar or trem. It uses a lever (“vibrato arm”) attached to the bridge that can temporarily slacken or tighten the strings to alter the pitch. A player can use this to create a vibrato or a portamento effect. Early vibrato systems were often unreliable and made the guitar go out of tune easily. They also had a limited pitch range. Later Fender designs were better, but Fender held the patent on these, so other companies used older designs for many years.
With expiration of the Fender patent on the Stratocaster-style vibrato, various improvements on this type of internal, multi-spring vibrato system are now available. Floyd Rose introduced one of the first improvements on the vibrato system in many years when, in the late 1970s, he experimented with “locking” nuts and bridges that prevent the guitar from losing tuning, even under heavy vibrato bar use.
The fourth type of system employs string-through body anchoring. The strings pass over the bridge saddles, then through holes through the top of the guitar body to the back. The strings are typically anchored in place at the back of the guitar by metal ferrules. Many believe this design improves a guitar’s sustain and timbre. A few examples of string-through body guitars are the Fender Telecaster Thinline, Telecaster Deluxe, B.C.Rich IT Warlock and Mockingbird, the Schecter Omen 6 and 7 series.
Compared to an acoustic guitar, which has a hollow body, electric guitars make less audible sound when their strings are plucked, so electric guitars are normally plugged into a guitar amplifier. When an electric guitar is played, string movement produces a signal by generating (i.e., “inducing”) a small electric current in the magnetic pickups, which are magnets wound with coils of very fine wire. The signal passes through the tone and volume circuits to the output jack, and through a cable to an amplifier. The current induced is proportional to such factors as string density, and amount of movement over the pickups.
Because in most cases it is desirable to isolate coil-wound pickups from the unintended sound of internal vibration of loose coil windings, a guitar’s magnetic pickups are normally embedded or “potted” in wax, lacquer, or epoxy to prevent the pickup from producing a microphonic effect.
Because of their natural inductive qualities, all magnetic pickups tend to pick up ambient, usually unwanted electromagnetic interference or EMI. The resulting hum is particularly strong with single-coil pickups, and aggravated by the fact that many vintage guitars are insufficiently shielded against electromagnetic interference. The most common source is 50 or 60 Hz hum from power transmission systems (house wiring, etc.). Since nearly all amplifiers and audio equipment associated with electric guitars must be plugged in, it is a continuing technical challenge to reduce or eliminate unwanted hum.
Double-coil or “humbucker” pickups were invented as a way to reduce or counter the unwanted ambient hum sounds (known as 60 cycle hum). Humbuckers have two coils of opposite magnetic and electric polarity to produce a differential signal. Electromagnetic noise that hits both coils equally tries to drive the pickup signal towards positive on one coil and toward negative on the other, which cancels out the noise. The two coils are wired in phase, so their signal adds together. This high combined inductance of the two coils leads to the richer, “fatter” tone associated with humbucking pickups.
Piezoelectric pickups use a “sandwich” of quartz crystal or other piezoelectric material typically placed beneath the string saddles or nut. These devices respond to pressure changes from all vibration at these specific points.
Optical pickups are a type of pickup that sense string and body vibrations using infrared LED light. These pickups are not sensitive to EMI.
Some “hybrid” electric guitars are equipped with additional microphone, piezoelectric, optical, or other types of transducers to approximate an acoustic instrument tone and broaden the sonic palette of the instrument.
Electric guitar necks vary in composition and shape. The primary metric of guitar necks is the scale length, which is the vibrating length of the strings from nut to bridge. A typical Fender guitar uses a 25.5 inch scale length, while Gibson uses a 24.75 inch scale length in their Les Paul. While the scale length of the Les Paul is often described as 24.75 inches, it has varied through the years by as much as a half inch.
Frets are positioned proportionally to scale length—so the shorter the scale length, the closer the fret spacing. Opinions vary regarding the effect of scale length on tone and feel. Popular opinion holds that longer scale length contributes to greater amplitude. Reports of playing feel are greatly complicated by the many factors involved in this perception. String gauge and design, neck construction and relief, guitar setup, playing style and other factors contribute to the subjective impression of playability or feel.
Necks are described as bolt-on, set-in, or neck-through depending on how they attach to the body. Set-in necks are glued to the body in the factory, and are said to have a warmer tone and greater sustain. This is the most traditional type of joint. Leo Fender pioneered bolt-on necks on electric guitars to facilitate easy adjustment and replacement. Neck-through instruments extend the neck the length of the instrument so that it forms the center of the body, and are known for long sustain and for being particularly sturdy. While a set neck can be carefully unglued by a skilled luthier, and a bolt-on neck can simply be unscrewed, a neck-through design is difficult or even impossible to repair, depending on the damage. Historically, the bolt-on style has been more popular for ease of installation and adjustment. Since bolt-on necks can be easily removed, there is an after-market in replacement bolt-on necks from companies such as Warmoth and Mighty Mite. Some instruments—notably most Gibson models—continue to use set/glued necks. Neck-through bodies are somewhat more common in bass guitars.
Materials for necks are selected for dimensional stability and rigidity, and some allege that they influence tone. Hardwoods are preferred, with maple, mahogany, and ash topping the list. The neck and fingerboard can be made from different materials, such as a maple neck with a rosewood or ebony fingerboard. In the 1970s, designers began to use exotic man-made materials such as aircraft grade aluminum, carbon fiber, and ebonol. Makers known for these unusual materials include John Veleno, Travis Bean, Geoff Gould, and Alembic.
Aside from possible engineering advantages, some feel that in relation to the rising cost of rare tonewoods, man-made materials may be economically preferable and more ecologically sensitive. However, wood remains popular in production instruments, though sometimes in conjunction with new materials. Vigier guitars, for example, use a wooden neck reinforced by embedding a light, carbon fiber rod in place of the usual heavier steel bar or adjustable steel truss rod. After-market necks made entirely from carbon fiber fit existing bolt-on instruments. Few, if any, extensive formal investigations have been widely published that confirm or refute claims over the effects of different woods or materials on electric guitar sound.
Several neck shapes appear on guitars, including shapes known as C necks, U necks, and V necks. These refer to the cross-sectional shape of the neck (especially near the nut). Several sizes of fret wire are available, with traditional players often preferring thin frets, and metal shredders liking thick frets. Thin frets are considered better for playing chords, while thick frets allow lead guitarists to bend notes with less effort.
An electric guitar with a folding neck called the “Foldaxe” was designed and built for Chet Atkins by Roger C. Field. Steinberger guitars developed a line of exotic, carbon fiber instruments without headstocks, with tuning done on the bridge instead.
Fingerboards vary as much as necks. The fingerboard surface usually has a cross-sectional radius that is optimized to accommodate finger movement for different playing techniques. Fingerboard radius typically ranges from nearly flat (a very large radius) to radically arched (a small radius). The vintage Fender Telecaster, for example, has a typical small radius of approximately 7.25 inches. Some manufacturers have experimented with fret profile and material, fret layout, number of frets, and modifications of the fingerboard surface for a variety of reasons. Some innovations were intended to improve playability by ergonomic means, such as Warmoth Guitars compound radius fingerboard. Scalloped fingerboards added enhanced microtonality during fast legato runs. Fanned frets intend to provide each string with an optimal playing tension and enhanced musicality. Some guitars have no frets—and others, like the Gittler guitar, have no neck in the traditional sense.
An acoustic guitar is a guitar that uses only acoustic means to transmit the strings’ vibrational energy to the air in order to make a sound. Acoustic means not electric or using electric impulses (see Electric guitar). The sound waves of an acoustic guitar are directed through the body of the guitar creating a sound. This typically involves the use of a sound board and a sound box to strengthen the vibrations of the strings.
The main source of sound in an acoustic guitar is the string, which is plucked with the finger or with a plectrum. The string vibrates at a necessary frequency and also create many harmonics at various different frequencies. The frequencies produced can depend on string length, mass, and tension. The string causes the soundboard and sound box to vibrate, and as these have their own resonances at certain frequencies, they amplify some string harmonics more strongly than others, hence affecting the timbre produced by the instrument.
The acoustic guitar’s soundboard, or top, also has a strong effect on the loudness of the guitar. No amplification actually occurs in this process, because no external energy is added to increase the loudness of the sound (as would be the case with an electronic amplifier). All the energy is provided by the plucking of the string. But without a soundboard, the string would just “cut” through the air without actually moving it much. The soundboard increases the surface of the vibrating area in a process called mechanical impedance matching. The soundboard can move the air much more easily than the string alone, because it is large and flat. This increases the entire system’s energy transfer efficiency, and a much louder sound is emitted.
In addition, the acoustic guitar has a hollow body and an additional coupling and resonance effect increases the efficiency of energy transmission in lower frequencies. The air in a guitar’s cavity resonates with the vibrational modes of the string and soundboard. At low frequencies, which depend on the size of the box, the chamber acts like a Helmholtz resonator, increasing or decreasing the volume of the sound again depending on whether the air in the box is moving in phase or out of phase with the strings. When in phase, the sound is increased by about 3 decibels and when in opposing phase, it is decreased about 3 decibels. As a Helmholtz resonator, the air at the opening is vibrating in or out of phase with the air in the box and in or out of phase with the strings. These resonance interactions attenuate or amplify the sound at different frequencies, boosting or damping various harmonic tones. Ultimately, the cavity air vibrations couple to the outside air through the sound hole, though some[which?] variants of the acoustic guitar omit this hole, or have f holes, like a violin family instrument (a trait found in some electric guitars such as the ES-335 and Lucille models from Gibson). This coupling is most efficient because here the impedance matching is perfect: it is air pushing air.
There are therefore several sound coupling modes in an acoustic guitar: string to soundboard, soundboard to cavity air, and both soundboard and cavity air, to outside air. The back of the guitar will also vibrate to a lesser extent, driven by the air in the cavity. The function of the entire acoustic system is twofold: to color the sound through the generation and amplification of harmonics, and to maximize the coupling of this energy to the surrounding air — which is ultimately what we perceive as loudness of the produced sound. Improved coupling, however, comes at the expense of decay time, since now the string’s energy is more efficiently transmitted. An unamplified guitar (one with no soundboard at all) would have a low volume, but the strings would vibrate much longer, like a tuning fork.
All these complex air coupling interactions, along with the resonant properties of the panels themselves, are a key reason that different guitars will have different tonal qualities. The sound is a complex mixture of harmonics that give the guitar its distinctive sound.
The name “guitar” comes from the ancient Sanskrit word for “string” – “tar”. (This is the language from which the languages of central Asia and northern India developed.) Many stringed folk instruments exist in Central Asia to this day which have been used in almost unchanged form for several thousand years, as shown by archeological finds in the area. Many have names that end in “tar”, with a prefix indicating the number of strings:
The guitar is an ancient and noble instrument, whose history can be traced back over 4000 years. Many theories have been advanced about the instrument’s ancestry. It has often been claimed that the guitar is a development of the lute, or even of the ancient Greek kithara. Research done by Dr. Michael Kasha in the 1960’s showed these claims to be without merit. He showed that the lute is a result of a separate line of development, sharing common ancestors with the guitar, but having had no influence on its evolution. The influence in the opposite direction is undeniable, however – the guitar’s immediate forefathers were a major influence on the development of the fretted lute from the fretless oud which the Moors brought with them to to Spain.
The sole “evidence” for the kithara theory is the similarity between the greek word “kithara” and the Spanish word “quitarra”. It is hard to imagine how the guitar could have evolved from the kithara, which was a completely different type of instrument – namely a square-framed lap harp, or “lyre”. (Right)
It would also be passing strange if a square-framed seven-string lap harp had given its name to the early Spanish 4-string “quitarra”. Dr. Kasha turns the question around and asks where the Greeks got the name “kithara”, and points out that the earliest Greek kitharas had only 4 strings when they were introduced from abroad. He surmises that the Greeks hellenified the old Persian name for a 4-stringed instrument, “chartar”. (See below.)
The earliest stringed instruments known to archaeologists are bowl harps and tanburs. Since prehistory people have made bowl harps using tortoise shells and calabashes as resonators, with a bent stick for a neck and one or more gut or silk strings. The world’s museums contain many such “harps” from the ancient Sumerian, Babylonian, and Egyptian civilisations. Around 2500 – 2000 CE more advanced harps, such as the opulently carved 11-stringed instrument with gold decoration found in Queen Shub-Ad’s tomb, started to appear.
“Queen Shub-Ad’s harp” (from the Royal Cemetery in Ur)
Egyptian wall painting, Thebes, 1420 BCE
Archaeologists have also found many similar relics in the ruins of the ancient Persian and Mesopotamian cultures. Many of these instruments have survived into modern times in almost unchanged form, as witness the folk instruments of the region like the Turkish saz, Balkan tamburitsa, Iranian setar, Afghan panchtar and Greek bouzouki.
The oldest preserved guitar-like instrument
At 3500 years old, this is the ultimate vintage guitar! It belonged to the Egyptian singer Har-Mose. He was buried with his tanbur close to the tomb of his employer, Sen-Mut, architect to Queen Hatshepsut, who was crowned in 1503 BCE. Sen-Mut (who, it is suspected, was far more than just chief minister and architect to the queen) built Hatshepsuts beautiful mortuary temple, which stands on the banks of the Nile to this day.
What is a guitar, anyway?
To distinguish guitars from other members of the tanbur family, we need to define what a guitar is. Dr. Kasha defines a guitar as having “a long, fretted neck, flat wooden soundboard, ribs, and a flat back, most often with incurved sides” .
The oldest known iconographical representation of an instrument displaying all the essential features of a guitar is a stone carving at Alaca Huyuk in Turkey, of a 3300 year old Hittite “guitar” with “a long fretted neck, flat top, probably flat back, and with strikingly incurved sides”.
three = Sanskrit “tri” – modern Persian “se” –
setar, 3-string instrument, found in Persia (Iran),
(cf. sitar, India, elaborately developed, many-stringed)
four = Sanskrit “chatur” – modern Persian “char” –
chartar, 4-string instrument, Persia (most commonly known as “tar” in modern usage)
(cf. quitarra, early Spanish 4-string guitar,
modern Arabic qithara, Italian chitarra, etc)
five = Sanskrit “pancha” – modern Persian “panj” –
panchtar, 5 strings, Afghanistan
The Indian sitar almost certainly took its name from the Persian setar, but over the centuries the Indians developed it into a completely new instrument, following their own aesthetic and cultural ideals.
Tanburs and harps spread around the ancient world with travellers, merchants and seamen. The four-stringed Persian chartar (note the narrow waist!) arrived in Spain, where it changed somewhat in form and construction, acquired pairs of unison-tuned strings instead of single strings and became known as the quitarra or chitarra.
From four-, to five-, to six-string guitar
As we have seen, the guitar’s ancestors came to Europe from Egypt and Mesopotamia. These early instruments had, most often, four strings – as we have seen above, the word “guitar” is derived from the Old Persian “chartar”, which, in direct translation, means “four strings”. Many such instruments, and variations with from three to five strings, can be seen in mediaeval illustrated manuscripts, and carved in stone in churches and cathedrals, from Roman times through till the Middle Ages. Right: Roman “guitar”, c:a 200 CE.
Mediaeval psalter, c:a 900 CE.
By the beginning of the Renaissance, the four-course (4 unison-tuned pairs of strings) guitar had become dominant, at least in most of Europe. (Sometimes a single first string was used.) The earliest known music for the four-course “chitarra” was written in 16th century Spain. The five-course guitarra battente (left) first appeared in Italy at around the same time, and gradually replaced the four-course instrument. The standard tuning had already settled at A, D, G, B, E, like the top five strings of the modern guitar.
In common with lutes, early guitars seldom had necks with more than 8 frets free of the body, but as the guitar evolved, this increased first to 10 and then to 12 frets to the body.
5-course guitar by Antonio Stradivarius, 1680
A sixth course of strings was added to the Italian “guitarra battente” in the 17th century, and guitar makers all over Europe followed the trend. The six-course arrangement gradually gave way to six single strings, and again it seems that the Italians were the driving force. (The six-string guitar can thus be said to be a development of the twelve-string, rather than vice versa, as is usually assumed.)
In the transition from five courses to six single strings, it seems that at least some existing five-course instruments were modified to the new stringing pattern. This was a fairly simple task, as it only entailed replacing (or re-working) the nut and bridge, and plugging four of the tuning peg holes. An incredibly ornate guitar by the German master from Hamburg, Joakim Thielke (1641 – 1719), was altered in this way. (Note that this instrument has only 8 frets free of the body.)
At the beginning of the 19th century one can see the modern guitar beginning to take shape. Bodies were still fairly small and narrow-waisted.
6-string guitar by George Louis Panormo, 1832
The modern “classical” guitar took its present form when the Spanish maker Antonio Torres increased the size of the body, altered its proportions, and introduced the revolutionary “fan” top bracing pattern, in around 1850. His design radically improved the volume, tone and projection of the instrument, and very soon became the accepted construction standard. It has remained essentially unchanged, and unchallenged, to this day.
Guitar by Antonio Torres Jurado, 1859
Steel-string and electric guitars
At around the same time that Torres started making his breakthrough fan-braced guitars in Spain, German immigrants to the USA – among them Christian Fredrich Martin – had begun making guitars with X-braced tops. Steel strings first became widely available in around 1900. Steel strings offered the promise of much louder guitars, but the increased tension was too much for the Torres-style fan-braced top. A beefed-up X-brace proved equal to the job, and quickly became the industry standard for the flat-top steel string guitar.
At the end of the 19th century Orville Gibson was building archtop guitars with oval sound holes. He married the steel-string guitar with a body constructed more like a cello, where the bridge exerts no torque on the top, only pressure straight down. This allows the top to vibrate more freely, and thus produce more volume. In the early 1920’s designer Lloyd Loar joined Gibson, and refined the archtop “jazz” guitar into its now familiar form with f-holes, floating bridge and cello-type tailpiece.
The electric guitar was born when pickups were added to Hawaiian and “jazz” guitars in the late 1920’s, but met with little success before 1936, when Gibson introduced the ES150 model, which Charlie Christian made famous.
With the advent of amplification it became possible to do away with the soundbox altogether. In the late 1930’s and early 1940’s several actors were experimenting along these lines, and controversy still exists as to whether Les Paul, Leo Fender, Paul Bigsby or O.W. Appleton constructed the very first solid-body guitar. Be that as it may, the solid-body electric guitar was here to stay.